What Installation Covers
Typical installation jobs include toilets, sinks, faucets, tubs and showers, laundry hookups, dishwashers, garbage disposals, water heaters and new shutoff valves. For larger projects the plumber may also run new supply and drain lines, relocate fixtures or add a bathroom.
The best time to bring in a plumber on a remodel is before the walls are closed up. Rough-in plumbing is cheaper to change while the framing is open, and a plan that includes shutoffs at each fixture saves emergency calls later.
Common Installation Jobs
| Job | What the plumber handles | Related page |
|---|---|---|
| Toilet | Set, seal, connect and test | Toilet repair |
| Faucet or sink | Install, connect supply lines and drain | Faucet and sink repair |
| Garbage disposal | Mount, wire to the switch and connect the drain | Disposal repair |
| Water heater | Install, vent, connect and test | Water heater installation |
| Sump pump | Basin, pump, check valve and discharge | Sump pump service |
| Water softener or filter | Bypass, drain and connections | Softeners and filtration |
Planning a Plumbing Project?
Call and describe the job. A same-day appointment is offered when available, and you hear the price first.
How an Installation Job Runs
- 1
Describe the project
You tell dispatch what is being installed, where and what is already in place.
- 2
Site check
The plumber looks at the space, the existing lines and shutoffs.
- 3
Clear price
You get a clear price before work starts, including parts and permits.
- 4
Install and test
The fixture is installed, connections are checked for leaks and operation is tested.
Code, Permits and Inspection in Rolling Meadows
The City of Rolling Meadows requires contractor licenses and bonds to be on file with Community Development before a permit is issued. Its plumbing FAQ includes a few rules that affect installations: dishwashers may not discharge into a disposal, concealed plumbing needs an access door or panel, and single-wall vent pipe needs 6 inches of clearance to combustibles while B-vent needs 1 inch.
Illinois plumbing code is set in 77 Ill. Adm. Code 890, and municipal inspectors enforce it. Before you buy fixtures or appliances, ask the plumber whether a permit applies. Doing it before work starts avoids having to open a finished wall for an inspection.
Choosing Fixtures That Fit the House
Older Rolling Meadows homes often have smaller bathrooms and compact kitchens, since much of the housing dates from 1950 to 1980. Measure the toilet rough-in, the vanity depth and the sink cabinet before you buy. A fixture that does not fit costs time and a return trip.
Ask for a shutoff valve at every new fixture. A small valve under a sink or behind a toilet lets you isolate a problem without shutting off the whole house, and it is one of the cheapest upgrades a plumber can add during an install.
Questions to Ask Before an Install
- Is a permit needed for this job, and who pulls it?
- Are the existing shutoffs and supply lines in good shape or should they be replaced?
- What is included in the price, and what would change it?
- Will walls or floors need to be opened, and who repairs them?
- What happens if a leak shows up after the job?
What Affects the Price
Installation pricing depends on the fixture and the work around it.
Want your real number? Call (847) 281-8626.
Sources and Local Rules Behind This Page
Plumbing work in Illinois is governed by the Illinois Plumbing Code, 77 Ill. Adm. Code 890, which municipal inspectors enforce, and the Illinois Department of Public Health licenses plumbers. The permit and vent clearance notes here come from the City of Rolling Meadows plumbing FAQ, according to which a new or replacement water heater needs a permit.
We name these sources so you can check them yourself. Rules and phone numbers change, so confirm with the city office or the state before you rely on any detail for a permit or a purchase.
Common Questions
Yes. We install toilets, faucets, sinks, disposals, water heaters, sump pumps and more.
Some jobs do, such as a new or replacement water heater. The plumber tells you before work starts.
Often yes. Ask first, since fit, rough-in and warranty terms vary.
Yes, with a plan for supply, drain and vent lines. A site visit comes first.
Installs are scheduled, but the 24/7 line is open if a leak or failure happens.
Still not sure what you are dealing with? Call (847) 281-8626 and describe it to our dispatcher.